§ 393.104 What standards must cargo securement devices and systems meet in order to satisfy the requirements of this subpart?
Wording in the annual edition revised as of Oct. 1, 2003, superseded by the 2006 annual edition.
(a) ProtectionGeneral. againstAll longitudinaldevices movement.and Whensystems aused motorto vehiclesecure carries cargo thatto isor notwithin firmly braced against a front-endvehicle structuremust thatbe conformscapable toof meeting the requirements of § 393.106,102.
(b) Prohibition on the use of damaged securement devices. All vehicle structures, systems, parts, and components used to secure cargo must be securedin soproper that,working order when theused vehicleto deceleratesperform atthat afunction ratewith ofno 20damaged feetor perweakened secondcomponents perthat second,will theadversely effect their performance for cargo willsecurement remainpurposes, onincluding reducing the vehicleworking load limit, and willmust not penetratehave theany vehicle'scracks front-endor structurecuts.
(bc) ProtectionVehicle againststructures lateraland movementanchor points. WhenVehicle astructures, vehiclefloors, carrieswalls, decks, tiedown anchor points, headerboards, bulkheads, stakes, posts and associated mounting pockets used to contain or secure articles of cargo must be strong enough to meet the performance criteria of § 393.102, with no damaged or weakened components that maywill shiftadversely sidewayseffect intheir transitperformance for cargo securement purposes, including reducing the cargoworking load limit, and must eithernot behave securelyany blockedcracks or bracedcuts.
(d) againstMaterial thefor sidesdunnage, sideboardschocks, cradles, shoring bars, blocking and bracing. Material used as dunnage or stakesdunnage bags, chocks, cradles, shoring bars, or used for blocking and bracing, must not have damage or defects which would compromise the effectiveness of the vehiclesecurement orsystem.
(e) beManufacturing securedstandards byfor tiedown assemblies. Tiedown assemblies (including chains, wire rope, steel strapping, synthetic webbing, and cordage) and other attachment or fastening devices thatused to secure articles of cargo to, or in, commercial motor vehicles must conform to the requirementsfollowing applicable standards:
An assembly component of paragraph. . . Must conform to . . .
(b1) Steel strapping 1, 2
Standard Specification for Strapping, Flat Steel and Seals, American Society for Testing and Materials (ASTM) D3953-97, February 1998.4
(2) Chain National Association of Chain Manufacturers' Welded Steel Chain Specifications, November 15, 1999.4
(b3) Webbing Web Sling and Tiedown Association's Recommended Standard Specification for Synthetic Web Tiedowns, WSTDA-T1, 1998.4
(4) Wire rope 3
Wire Rope Technical Board's Wire Rope Users Manual, 2nd Edition, November 1985.4
(5) Cordage Cordage Institute rope standard:
(i) PETRS-2, orPolyester Fiber Rope, three-Strand and eight-Strand Constructions, January 1993; 4
(bii) PPRS-2, Polypropylene Fiber Rope, three-Strand and eight-Strand Constructions, August 1992; 4
(iii) CRS-1, Polyester/Polypropylene Composite Rope Specifications, three-Strand and eight-Strand Standard Construction, May 1979; 4
(iv) NRS-1, Nylon Rope Specifications, three-Strand and eight-Strand Standard Construction, May 1979; 4 and
(v) C-1, Double Braided Nylon Rope Specifications DBN, January 1984.4
1 Steel strapping not marked by the manufacturer with a working load limit will be considered to have a working load limit equal to one-fourth of the breaking strength listed in ASTM D3953-97.
2 Steel strapping 25.4 mm (1 inch) or wider must have at least two pairs of crimps in each seal and, when an end-over-end lap joint is formed, must be sealed with at least two seals.
3 Wire rope which is not marked by the manufacturer with a working load limit shall be considered to have a working load limit equal to one-fourth of the nominal strength listed in the manual.
4 See § 393.1007 for information on the incorporation by reference and availability of this document.
(cf) EffectiveUse dateof tiedowns. This(1) sectionTiedowns and securing devices must not contain knots.
(2) If a tiedown is effectiverepaired, onit Octobermust 1be repaired in accordance with the applicable standards in paragraph (e) of this section, 1973or the manufacturer's instructions.[38(3) FREach 23522tiedown must be attached and secured in a manner that prevents it from becoming loose, Augunfastening, opening or releasing while the vehicle is in transit.
(4) 31,All 1973tiedowns and other components of a cargo securement system used to secure loads on a trailer equipped with rub rails, asmust amendedbe located inboard of the rub rails whenever practicable.
(5) Edge protection must be used whenever a tiedown would be subject to abrasion or cutting at 38the FRpoint 25183,where Septit touches an article of cargo. 12The edge protection must resist abrasion, 1973]cutting and crushing.
(a) General. All devices and systems used to secure cargo to or within a vehicle must be capable of meeting the requirements of § 393.102.
(b) Prohibition on the use of damaged securement devices. All vehicle structures, systems, parts, and components used to secure cargo must be in proper working order when used to perform that function with no damaged or weakened components that will adversely effect their performance for cargo securement purposes, including reducing the working load limit, and must not have any cracks or cuts.
(c) Vehicle structures and anchor points. Vehicle structures, floors, walls, decks, tiedown anchor points, headerboards, bulkheads, stakes, posts and associated mounting pockets used to contain or secure articles of cargo must be strong enough to meet the performance criteria of § 393.102, with no damaged or weakened components that will adversely effect their performance for cargo securement purposes, including reducing the working load limit, and must not have any cracks or cuts.
(d) Material for dunnage, chocks, cradles, shoring bars, blocking and bracing. Material used as dunnage or dunnage bags, chocks, cradles, shoring bars, or used for blocking and bracing, must not have damage or defects which would compromise the effectiveness of the securement system.
(e) Manufacturing standards for tiedown assemblies. Tiedown assemblies (including chains, wire rope, steel strapping, synthetic webbing, and cordage) and other attachment or fastening devices used to secure articles of cargo to, or in, commercial motor vehicles must conform to the following applicable standards:
| An assembly component of . . . | Must conform to . . . |
|---|---|
| (1) Steel strapping 1, 2 | Standard Specification for Strapping, Flat Steel and Seals, American Society for Testing and Materials (ASTM) D3953-97, February 1998.4 |
| (2) Chain | National Association of Chain Manufacturers' Welded Steel Chain Specifications, November 15, 1999.4 |
| (3) Webbing | Web Sling and Tiedown Association's Recommended Standard Specification for Synthetic Web Tiedowns, WSTDA-T1, 1998.4 |
| (4) Wire rope 3 | Wire Rope Technical Board's Wire Rope Users Manual, 2nd Edition, November 1985.4 |
| (5) Cordage | Cordage Institute rope standard: |
| (i) PETRS-2, Polyester Fiber Rope, three-Strand and eight-Strand Constructions, January 1993; 4 | |
| (ii) PPRS-2, Polypropylene Fiber Rope, three-Strand and eight-Strand Constructions, August 1992; 4 | |
| (iii) CRS-1, Polyester/Polypropylene Composite Rope Specifications, three-Strand and eight-Strand Standard Construction, May 1979; 4 | |
| (iv) NRS-1, Nylon Rope Specifications, three-Strand and eight-Strand Standard Construction, May 1979; 4 and | |
| (v) C-1, Double Braided Nylon Rope Specifications DBN, January 1984.4 |
1 Steel strapping not marked by the manufacturer with a working load limit will be considered to have a working load limit equal to one-fourth of the breaking strength listed in ASTM D3953-97.
2 Steel strapping 25.4 mm (1 inch) or wider must have at least two pairs of crimps in each seal and, when an end-over-end lap joint is formed, must be sealed with at least two seals.
3 Wire rope which is not marked by the manufacturer with a working load limit shall be considered to have a working load limit equal to one-fourth of the nominal strength listed in the manual.
4 See § 393.7 for information on the incorporation by reference and availability of this document.
(f) Use of tiedowns. (1) Tiedowns and securing devices must not contain knots.
(2) If a tiedown is repaired, it must be repaired in accordance with the applicable standards in paragraph (e) of this section, or the manufacturer's instructions.
(3) Each tiedown must be attached and secured in a manner that prevents it from becoming loose, unfastening, opening or releasing while the vehicle is in transit.
(4) All tiedowns and other components of a cargo securement system used to secure loads on a trailer equipped with rub rails, must be located inboard of the rub rails whenever practicable.
(5) Edge protection must be used whenever a tiedown would be subject to abrasion or cutting at the point where it touches an article of cargo. The edge protection must resist abrasion, cutting and crushing.
Amendment history
5 distinct wordings on file since Oct. 1, 1996- [67 FR 61225, Sept. 27, 2002, as amended at 71 FR 35833, June 22, 2006]
- [67 FR 61225, Sept. 27, 2002, as amended at 71 FR 35833, June 22, 2006]
- [67 FR 61225, Sept. 27, 2002, as amended at 71 FR 35833, June 22, 2006]
- Oct. 1, 1996 → Oct. 1, 2003annual editions 1996–2002[38 FR 23522, Aug. 31, 1973, as amended at 38 FR 25183, Sept. 12, 1973]
A new entry appears whenever the regulatory words change between government snapshots. Day-precise from the eCFR (2017 onward); before that, one snapshot per annual CFR edition (revised as of October 1). Bracketed citations are the Federal Register history printed with the section.