§ 383.113 Required skills.
Current wording, in the annual edition revised as of Oct. 1, 2011.
(a) BasicPre-trip vehicle controlinspection skills. AllApplicants applicants for a CDL must possess andthe demonstratefollowing basic motorpre-trip vehicle controlinspection skills for eachthe vehicle groupclass whichthat the driver operates or expects to operate.:
(1) TheseAll skillstest shouldvehicles. includeApplicants themust abilitybe toable start, to stop,identify andeach tosafety-related movepart on the vehicle forward and backwardexplain inwhat aneeds safeto manner.be
(b)Safeinspected drivingto skills.ensure All applicants for a CDLsafe mustoperating possesscondition andof demonstrateeach thepart, safeincluding:
(i) drivingEngine skillscompartment;
(ii) forCab/engine theirstart;
(iii) vehicleSteering;
(iv) group.Suspension;
(v) TheseBrakes;
(vi) skillsWheels;
(vii) shouldSide includeof propervehicle;
(viii) visualRear searchof methods,vehicle; appropriateand
(ix) useSpecial features of signalstractor trailer, speedschool controlbus, foror weathercoach/transit and traffic conditionsbus, andif abilitythis totype positionof the motor vehicle correctlyis whenbeing changingused lanesfor orthe turningtest.
(c2) Air brake skills.equipped Excepttest as provided in § 393vehicles.95, allApplicants applicantsmust shall demonstrate the following skills with respect to inspection and operation of air brakes:
(1) Pre-trip inspection skills. Applicants shall demonstrate the skills necessary to conduct a pre-trip inspection which includes the ability to:i) Locate and verbally identify air brake operating controls and monitoring devices;
(
(ii) Determine the motor vehicle's brake system condition for proper adjustments and that air system connections between motor vehicles have been properly made and secured;
(iii) Inspect the low pressure warning device(s) to ensure that they will activate in emergency situations;
(iv) Ascertain,With with the engine running, make sure that the system maintains an adequate supply of compressed air;
(v) Determine that required minimum air pressure build up time is within acceptable limits and that required alarms and emergency devices automatically deactivate at the proper pressure level; and
(vi) Operationally check the brake system for proper performance.
(2b) DrivingBasic vehicle control skills. ApplicantsAll shallapplicants successfullyfor completea CDL must possess and demonstrate the following basic motor vehicle control skills testsfor containedthe vehicle class that the driver operates or expects to operate:
(1) Ability to start, warm up, and shut down the engine;
(2) Ability to put the motor vehicle in §motion 383and accelerate smoothly, forward and backward;
(3) Ability to bring the motor vehicle to a smooth stop;
(4) Ability to back the motor vehicle in a straight line, and check path and clearance while backing;
(5) Ability to position the motor vehicle to negotiate safely and then make left and right turns;
(6) Ability to shift as required and select appropriate gear for speed and highway conditions; and
(7) Ability to back along a curved path.113
(c) Safe on-road driving skills. All applicants for a CDL must possess and demonstrate the following safe on-road driving skills for their vehicle class:
(1) Ability to use proper visual search methods;
(2) Ability to signal appropriately when changing direction in traffic;
(3) Ability to adjust speed to the configuration and condition of the roadway, weather and visibility conditions, traffic conditions, and motor vehicle, cargo and driver conditions;
(4) Ability to choose a representativesafe gap for changing lanes, passing other vehicles, as well as for crossing or entering traffic;
(5) Ability to position the motor vehicle equippedcorrectly withbefore airand brakesduring a turn to prevent other vehicles from passing on the wrong side, as well as to prevent problems caused by off-tracking;
(6) Ability to maintain a safe following distance depending on the condition of the road, visibility, and vehicle weight;
(7) Ability to adjust operation of the motor vehicle to prevailing weather conditions including speed selection, braking, direction changes, and following distance to maintain control; and
(8) Ability to observe the road and the behavior of other motor vehicles, particularly before changing speed and direction.
(d) Test area. Skills tests shall be conducted in on-street conditions or under a combination of on-street and off-street conditions.
(e) Simulation technology. A State may utilize simulators to perform skills testing, but under no circumstances as a substitute for the required testing in on-street conditions.
[76 FR 26889, May 9, 2011]
(a) Pre-trip vehicle inspection skills. Applicants for a CDL must possess the following basic pre-trip vehicle inspection skills for the vehicle class that the driver operates or expects to operate:
(1) All test vehicles. Applicants must be able to identify each safety-related part on the vehicle and explain what needs to be inspected to ensure a safe operating condition of each part, including:
(i) Engine compartment;
(ii) Cab/engine start;
(iii) Steering;
(iv) Suspension;
(v) Brakes;
(vi) Wheels;
(vii) Side of vehicle;
(viii) Rear of vehicle; and
(ix) Special features of tractor trailer, school bus, or coach/transit bus, if this type of vehicle is being used for the test.
(2) Air brake equipped test vehicles. Applicants must demonstrate the following skills with respect to inspection and operation of air brakes:
(i) Locate and verbally identify air brake operating controls and monitoring devices;
(ii) Determine the motor vehicle's brake system condition for proper adjustments and that air system connections between motor vehicles have been properly made and secured;
(iii) Inspect the low pressure warning device(s) to ensure that they will activate in emergency situations;
(iv) With the engine running, make sure that the system maintains an adequate supply of compressed air;
(v) Determine that required minimum air pressure build up time is within acceptable limits and that required alarms and emergency devices automatically deactivate at the proper pressure level; and
(vi) Operationally check the brake system for proper performance.
(b) Basic vehicle control skills. All applicants for a CDL must possess and demonstrate the following basic motor vehicle control skills for the vehicle class that the driver operates or expects to operate:
(1) Ability to start, warm up, and shut down the engine;
(2) Ability to put the motor vehicle in motion and accelerate smoothly, forward and backward;
(3) Ability to bring the motor vehicle to a smooth stop;
(4) Ability to back the motor vehicle in a straight line, and check path and clearance while backing;
(5) Ability to position the motor vehicle to negotiate safely and then make left and right turns;
(6) Ability to shift as required and select appropriate gear for speed and highway conditions; and
(7) Ability to back along a curved path.
(c) Safe on-road driving skills. All applicants for a CDL must possess and demonstrate the following safe on-road driving skills for their vehicle class:
(1) Ability to use proper visual search methods;
(2) Ability to signal appropriately when changing direction in traffic;
(3) Ability to adjust speed to the configuration and condition of the roadway, weather and visibility conditions, traffic conditions, and motor vehicle, cargo and driver conditions;
(4) Ability to choose a safe gap for changing lanes, passing other vehicles, as well as for crossing or entering traffic;
(5) Ability to position the motor vehicle correctly before and during a turn to prevent other vehicles from passing on the wrong side, as well as to prevent problems caused by off-tracking;
(6) Ability to maintain a safe following distance depending on the condition of the road, visibility, and vehicle weight;
(7) Ability to adjust operation of the motor vehicle to prevailing weather conditions including speed selection, braking, direction changes, and following distance to maintain control; and
(8) Ability to observe the road and the behavior of other motor vehicles, particularly before changing speed and direction.
(d) Test area. Skills tests shall be conducted in on-street conditions or under a combination of on-street and off-street conditions.
(e) Simulation technology. A State may utilize simulators to perform skills testing, but under no circumstances as a substitute for the required testing in on-street conditions.
[76 FR 26889, May 9, 2011]
Amendment history
2 distinct wordings on file since Oct. 1, 1996- [76 FR 26889, May 9, 2011]
- Oct. 1, 1996 → Oct. 1, 2011annual editions 1996–2010
A new entry appears whenever the regulatory words change between government snapshots. Day-precise from the eCFR (2017 onward); before that, one snapshot per annual CFR edition (revised as of October 1). Bracketed citations are the Federal Register history printed with the section. Set a case date in the header to read any earlier wording.